If the printer’s IP Address changes, you will need to repeat steps to reconfigure the Epson Scan network settings. Click OK again to close the window. For instructions on how to print a status sheet see the Related Articles section or click here. Enter the WPA passphrase into the two fields. At the next screen, select the option « Set up this printer for the first time ». Epson s’est engagé à soutenir Windows 8 et de Windows 8. Select Network as the Connection setting.
|Nom:||driver de epson stylus sx230|
|Système d’exploitation:||Windows, Mac, Android, iOS|
|Licence:||Usage Personnel Seulement|
When network connection settings fail, a red indicator is displayed. When you see this screen, click Finish. Eepson not turn off the printer or disconnect the Ethernet cable. You may see the pop-up message below. Enter the WPA passphrase into the two fields. It may take up to 90 seconds for your computer to find the printer on the network.
In this drier you will finalise the installation and configuration of the printer drivfr All-In-One. Select Yes if you want to print a Test Page to confirm the printer and connection.
If you use commercially available antivirus software and see a firewall warning for EasyInstallcreate an exception for EpsonNet EasyInstall to sx2230 it to carry out network configurations. For more information on how Epson treats your personal data, please read our Privacy Information Statement.
It may take up to 90 seconds for your computer to find the printer on the network. You will be prompted to remove the cable when configuration is complete.
You can now disconnect the Ethernet cable. If your printer has a memory card reader, you will see dw » Allow Access to Memory Cards over the Network Windows only » screen. Not signed drivdr yet? Contact Us Submit your contact details below and an Epson expert will be in touch: Wait while the printer connects to epsson Wireless Local Area Network. For Bonjour printing, you can add the printer via Bonjour in the main dr window.
Not yet an Friver partner? For Mac OS X: Find a repair centre eppson. S’identifier Pas encore inscrit?
Support et téléchargements – Epson Stylus SX – Epson
If you are adding a printer and see « Driver not installed »you may need to specify the type of printer you are using. Register The fields marked with an asterisk are required fields. The MAC address can be found on the printer’s network status sheet for instructions see the Related Articles section stlyus click here. To use this configuration method, your computer must be connected to the network wirelessly, and your computer’s Ethernet connection must be set to obtaining an IP Address automatically.
After you have confirmed the setting, this information is sent to the printer. Did you find this article helpful Yes No Thanks for stlus feedback. Home wireless routers all feature a built-in access point to support infrastructure mode. Click Finish to close: Configure your firewall software to allow network access for EpsonNet EasyInstall.
A été ajouté à votre panier Continuer les achats Valider la commande. The Epson stylys menu should appear, follow the on-screen instructions: For more information and for registration, please click here.
For instructions on how to eoson a status sheet see the Related Articles section or click here. The printer will now be added to the Printer List. Failure to follow this step will result in the printer or All-In-One not being ready to print or scan.